High Speed Folding Type Face Mask Machine / Mask Making Equipment
This machine is used for the automatic formation of flat masks: the
entire roll of raw materials passes through the unwinding,roller
driving, hemming, hemming, fixed-length cutting, forming, sealing,
cutting, welding ears and other processes, which areconveyed out of
the pipeline. The whole process is fully automatic, no labor is
required. The full-automatic flat mask production equipment has the
characteristics of stable performance, high output, low defect
rate, and easy operation.
This machine is mainly used for automatic forming of KN95 mask: the
whole roll of cloth is driven by roller after being unrolled, and
the cloth is folded and wrapped automatically. The whole nose
bridge strip is drawn and unrolled. After cutting the length, it is
imported into the edge cloth. The two sides are welded by
To the sealing, and then through ultrasonic lateral sealing,
through the cutting tool cutting molding; Transfer the mask to two
masks through an assembly line.
Easy for operator, greatly improve production efficiency, only one
operator required, frequency conversion speed regulation of the
production line to achieve the full automatic production of plane
masks, mainly including coil feeding, folding press, bridge rib
feeding, mask molding, mask cutting, ear tape feeding and welding,
finished product cutting process, complete the whole production
process from raw materials to mask finished products. The mask
produced has comfortable wear, no pressure, the mask filter effect
is good, fit the face shape, can be used in medical, electronic,
mining, construction and other industries.
The Folding masks machine is fully automatic production of Folding
Mask Making Machine, from the input of raw materials to the output
of the finished product, including the middle of the automatic
bridge of the nose, the ribbon of the spot welding, folding of the
triangle plate, waste discharge, to achieve the whole process only
1. High stability, low failure rate, beautiful and solid without
2. Computer PLC programming control, servodrive, high degree of
3. Photoelectric fiber raw materials to avoid mistakes and reduce
4. Precise transmission, stable control, adjustable speed, clear
and firm product embossing, good welding effect.
5. Automatically control the fabric feeding, facilitate to adjust.
6. Stainless steel structure, independent electrical control box,
machine compacted, small occupy
7. Ultrasonic welding can save time and labor, good for
8. Folding tool is easy for debugging.
9. Traditional electrical control is safe and convenient to
KN95 Face Mask Making Machine:
Made of multi-layered nonpoisonous, non-allergic, non-stimulating
materials. Adjust the bandage strip and built-in foam cushion to
adapt to various face-shapes with comfortable sealing. Application:
use for construction, mining, textile, grinding medicine.
|Equipment weight||≤3000kg,Ground load≤500KG/sqm|
|Electric and power||AC220V,50Hz,Approx 9kw|
|Air pressure||0.5-0.8Mpa 0.038cbm/min|
|Use environment||Temperature 10~35℃, humidity 5-35% HR, non-flammable, corrosive
gas, dust free (cleanliness not less than 100,000 class)|
|Product qualify rate||≥99%|
|Note: Except the incoming materials do not meet the requirements
and the improper operation of the staff|
|Equipment failure rate||≤2%|
|Note: Failure of the device itself|